Roberlo Multiplast Fast drying 2K Plastic Filler 1kg

Fast drying putty to repair any kind of plastic. Easy to apply. 65158 65158

• Product Type: Two-component (2K) polyester putty specifically designed for the repair of plastic parts in the automotive finishing industry.
• Application: Ideal for restoring and reshaping automotive plastic components such as bumpers, trims, and other plastic panels. Designed for professional use in vehicle body repair shops.
• Material Compatibility: Compatible with most plastic substrates used in automobiles (excluding polyethylene and polypropylene unless pre-treated).
• Drying Time: Fast-drying formulation allows for quick sanding and overcoating, improving body shop efficiency.
• Weight/Volume: Supplied in a 1 kg tin with hardener included.
• Mix Ratio: Typically mixed at a ratio of 100:2 (filler to hardener by weight), always refer to the product’s technical data sheet (TDS) for precise instructions.
• Surface Preparation: Surfaces must be clean, dry, and free from grease and dust. Sand the plastic surface and use a plastic adhesion promoter if necessary before application.
• Composition: Based on polyester resins; contains reaction initiators and fillers for enhanced adhesion and sanding.
• Safety Information: Contains styrene and other potentially hazardous solvents; use only in well-ventilated areas. Personal protective equipment (PPE) such as gloves, goggles, and suitable respiratory protection is recommended.
• Storage: Store in a cool, dry place between 5°C and 25°C. Keep the container tightly closed when not in use. Avoid direct sunlight and sources of ignition.
• Disposal: Dispose of in accordance with local regulations. Cured material should be treated as solid non-hazardous waste; uncured product may require special disposal procedures.