Pro XL Proetch Aerosol 500ml

ProEtch is a super fast drying acid etching primer that gives the ultimate adhesion direct onto many difficult substrates including; alloy, stainless steel, zintec and galvanise. The final surface is a super smooth non-porous finish that is suitable for any topcoat.

•Outstanding etching properties
•Excellent anti-corrosive properties
•Quick Dry acid Etching Primer allowing faster throughput
•Super smooth finish
•Supplied with 2 nozzles

• Product Type: Acid etching primer aerosol
• Volume: 500ml aerosol can
• Primary Use: Designed for direct application to difficult automotive substrates including alloy, stainless steel, zintec, and galvanised metal
• Drying Time: Super fast drying formulation to enhance workshop throughput
• Finish: Leaves a super smooth, non-porous surface ready for topcoating
• Adhesion: Outstanding etching properties ensure strong bond to substrates
• Anti-Corrosion: Excellent anti-corrosive protection to help extend the life of metal surfaces
• Application Guidance: For professional use on bare metal surfaces only. Ensure surfaces are clean and free from contaminants before application. Shake can thoroughly before use.
• Nozzles Included: Supplied with 2 application nozzles for varied spray patterns
• Composition: Acid etch primer – likely solvent-based; contains etching agents to promote metal adhesion (check label or Safety Data Sheet for full composition)
• Safety Information: Use in a well-ventilated area. Wear appropriate PPE including respirators, gloves, and eye protection. Flammable aerosol – keep away from heat, sparks, open flames, and hot surfaces. Dispose of in accordance with local hazardous waste regulations.
• Storage: Store upright in a cool, dry place away from direct sunlight and below 50°C. Do not expose to heat or freeze.