Max Meyer 1500 1K Plastic Primer 1L

The 1K Plastiprimer is a ready to use adhesion promoting plastic primer, which is designed for use on all bare plastics. Only one full light coat is necessary to modify the plastic surface, allowing topcoat adhesion.

• Product Type: Single-component (1K) ready-to-use plastic adhesion promoter
• Application: Designed for use on all bare automotive plastics (e.g., bumpers, trims) prior to topcoat application
• Volume: Supplied in a 1-liter container
• Usage Guidance: Apply one full light coat only—additional coats are not necessary and may hinder performance; no sanding required before application
• Topcoat Compatibility: Compatible with most automotive basecoats and topcoats once the primer has flashed off completely
• Dry Time: Flash-off time typically 10–15 minutes at 20°C before overcoating
• Composition: Solvent-based formulation with adhesion-promoting agents (contains organic solvents; always verify MSDS for full ingredient info)
• Surface Preparation: Ensure plastic substrate is clean, dry, and free from grease, silicone, and contaminants before application
• Application Tools: Suitable for spray gun application; ensure proper nozzle size as per spray equipment specifications
• Storage Instructions: Store in a cool, dry, and well-ventilated area away from direct sunlight and sources of ignition; recommended storage temperature is between 5°C and 35°C
• Safety Information: Flammable product—must be used in a well-ventilated area with proper PPE (gloves, goggles, respirator if needed); refer to safety datasheet (SDS) before use
• Disposal: Dispose of contents/container in accordance with local/regional/national/international regulations for hazardous waste