3M Panel Bonding Adhesive 200ml (08115)

The 3M Panel Bonding Adhesive is a two-part epoxy used to bond steel, aluminum, SMC, and FRP (traditional fiberglass). The primary use is to replace quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. Seal and bond in just one process with 3M Panel Bonding Adhesive. Our innovative, high performance and cost effective adhesive bonds steel, aluminium, SMC and FRP (traditional fibreglass) during replacement of quarter panels, roofs, box sides, van sides, utility vehicle sides and door skins. It can be spot welded through, or used in conjunction with, rivet bonds. In certain conditions, you can use it for bumper cover repair. This product is not intended to bond structural components of a vehicle such pillars, rockers or frame members. If doubt exists as to whether a particular component is structural, then that component should be welded. 3M 08115 8115

• A high performance two component epoxy adhesive
• Bonds a variety of steel, aluminum, SMC, and FRP (traditional fiberglass) non-structural components. Also use to reinforce welded or riveted structural components
• It can be spot welded through or used in conjunction with rivet bonds
• Corrosion inhibitors and glass bead technology to ensure bond line thickness
• Heat accelerated curing

• Product Type: Two-part epoxy adhesive
• Volume: 200ml cartridge
• Primary Applications: Designed for non-structural panel bonding in automotive repairs, including the replacement of quarter panels, roofs, box sides, van sides, utility vehicle sides, and door skins.
• Recommended Substrates: Bonds effectively to steel, aluminum, SMC (Sheet Molding Compound), and FRP (traditional fiberglass).
• Mechanical Compatibility: Can be spot welded through or used in conjunction with rivets for enhanced mechanical bonding.
• Additional Use: Can be used for certain bumper cover repairs (non-structural only).
• Bond Line Integrity: Incorporates glass bead technology to ensure consistent bond line thickness.
• Corrosion Protection: Contains corrosion inhibitors for long-term durability in bonded joints.
• Cure Acceleration: Heat can be used to accelerate curing for faster job turnaround.
• Structural Limitations: Not intended for bonding structural components such as pillars, rockers, or frame members. In such cases, welding is recommended.
• Storage Instructions: Store in a cool, dry place. Avoid exposure to direct sunlight and extreme temperatures.
• Health and Safety: Use in a well-ventilated area. Personal protective equipment (PPE) such as gloves, goggles, and respirators are recommended during use. Refer to the Safety Data Sheet (SDS) for detailed handling guidelines.
• Dispensing Requirement: Requires a 2:1 ratio cartridge applicator gun for proper dispensing and mixing of the two epoxy components.